Catalog and enquiry
A product ecosystem for the complete network
Not an online store: every family placed in its layer and stage — the water path or the control layer — with the manufacturers behind it.
- Product families
- 10
- Water-path stages
- 7
- Brands supplied
- 10
No prices or stock counts are published. Detailed specifications come from official manufacturer catalogs on request.
The system map: two layers, not one line
The water path is what water passes through. The control layer decides and signals, carries no water, and meets the path at the electric valve alone.
Water path
The route water physically takes, from the source to the plant. Water passes through every stage here.
Water source
The starting point the site already owns: a mains connection, a well, or a tank. Its pressure, flow, and water quality are the given that everything downstream is built on.
What decides the choice: Measuring and analyzing the source in the irrigation study before any component is chosen.
Not supplied by Smart Garden
The source belongs to the site. Our role is to measure and analyze it in the irrigation study before recommending any component, because an error here travels into the whole network.
Related service: Irrigation Design and Studies
Pumping
Provides the pressure and flow the hydraulic design requires, where the source alone does not.
What decides the choice: The duty point from the calculations: simultaneous-zone flow and the pressure required at the farthest point.
Related service: Irrigation Design and Studies
Filtration
Holds back contaminants before they enter the network, protecting irrigation components and reducing the risk of clogging.
What decides the choice: The water-source conditions and the requirements of the network downstream of it.
Related service: Irrigation Design and Studies
Mainlines and fittings
The pipe and fittings that carry the calculated flow from filtration to the valve locations.
What decides the choice: Diameters and pressure classes from the hydraulic calculations, with fittings matched to pipe type and installation method.
Related service: Supply of Irrigation Products
Valves
Divides the network into zones: solenoid valves open and close a zone on the controller's command, and isolation valves make maintenance safe.
What decides the choice: Line pressure, flow, and where the valve sits in the network.
Where the layers meetThis is the one place the control layer meets the water path: the signal reaches the valve's coil, and the water passes through the valve itself.
Related service: Supply of Irrigation Products
Secondary distribution
The laterals after the valve, carrying the zone's flow to the irrigation points inside it.
What decides the choice: Lateral length, how many outlets it carries, and the pressure loss allowed inside the zone.
The same family, another duty
The same family that serves the mainlines, at the diameters and pressure classes the zone's calculations set.
Pipes and FittingsRelated service: Irrigation Design and Studies
Irrigation application
The last metre: drip delivering to the root zone, sprinklers and rotors covering turf.
What decides the choice: Planting type, area and shape, and the precipitation rate each zone needs.
Related service: Irrigation Design and Studies
Control layer
A layer of decision and signal; no water passes through it. It meets the water path at the electric valve alone.
Controllers
Where irrigation schedules and zones are programmed and managed: when each zone runs, for how long, and in what order. Central multi-site control is available where the selected system supports it.
What decides the choice: Zone count, how the site needs to be operated, and what the selected system actually supports.
Related service: Technical Support and After-Sales Service
Sensors and weather
May help adjust irrigation schedules and run times according to site conditions.
What decides the choice: What the site genuinely needs to measure, and whether the sensor works with the selected controller.
Related service: Irrigation Design and Studies
Control communication
Carries the signal between the controller and the electric valves. It may be wired or wireless, depending on the selected system and the site.
What decides the choice: The selected system and the site conditions — and, for a wired link, run length, valve count, and a burial-rated cable sized for both.
Related service: Supply of Irrigation Products
Electric valves
The layer's end point: the signal reaches the valve's coil, which opens or closes an irrigation zone. The valve itself is a water-path component; here it is read from the control side.
What decides the choice: Whether coil voltage and station count match the selected controller.
The same family, another duty
The same family shown on the water path at stage W.05.
Valves and SolenoidsRelated service: Technical Support and After-Sales Service
Across the system
What does not sit at one stage, and serves both layers.
Accessories and spare parts
Does not sit at one stage: accessories and spare parts for the brands we supply, serving the water path and the control layer alike.
What decides the choice: The components actually installed on site, and the availability of spare parts that match them.
Related service: Technical Support and After-Sales Service
The ten families by role
Four groups across the two layers, so you reach a family by what it does rather than by its name.
Pumping and filtration
Between the source and the network: the pressure and flow the design requires, and the filtration that protects what follows.
Pumps and Water Movement
The pressure and flow the design requires.
Too little pressure leaves zones below their designed coverage; too much drives spray into drift. Both are departures from the calculated duty point.
Supported brands: Lowara
- Filtration
Filtration Systems
Protecting irrigation components from contaminants.
AZUD
Conveyance and flow control
The infrastructure water travels through: calculated mainlines and fittings, and valves that divide the network into zones.
Pipes and Fittings
The infrastructure everything flows through.
A pipe or fitting that does not match its pressure class or installation method shows up after backfill, where the repair costs excavation rather than a price difference.
Supported brands: Elysee · PLASCO · MPI ATLAS
- Valves
Valves and Solenoids
The point of action: where a decision becomes water.
Hunter · Pegler · AVK · MPI ATLAS
Irrigation application
The last metre, chosen from the planting: drip at the root zone, or sprinklers and rotors for turf.
Drip Irrigation
Water straight to the root, without evaporation or excess.
Surface watering in a hot climate loses much of its water to evaporation before the plant can use it.
Supported brands: Hunter · AZUD
- Irrigation application
Sprinklers and Rotors
Uniform coverage for turf and lawns.
Hunter
Control layer and continuity
What decides and carries the signal — with no water passing through it — and what keeps the installed components working after handover.
Smart Controllers
Where irrigation schedules and zones are programmed.
A fixed schedule irrigates the same amount in summer and winter, while a site's requirement changes across the year. Programming zones and run times correctly is what addresses that.
Supported brands: Hunter
- Sensors and weather
Sensors and Weather Monitoring
Site-condition input for the control layer.
Hunter
- Control communication
Irrigation Cables
The wired link between controller and valves.
Asharqiyah Cables
- Accessories and spare parts
Accessories and Spare Parts
Parts that match what is already installed.
Hunter · Elysee · AZUD
Cannot find what you need? Our range is wider than the listed families, and for spare parts for the brands we supply the team checks availability on enquiry.
Check availabilityWhat the selection is built on
Six inputs our engineering team works through before recommending any component, in this order.
Not sure which family?
Describe your site, your water source, and what you need to irrigate; our engineering team recommends the components within the irrigation study.
Design and studies serviceThe water source
The source's pressure, flow, and water conditions are the first input: pumping, filtration, diameters, and everything after them are built on it.
Matching filtration to the source
Filtration is chosen from the water-source conditions and the network's requirements, to protect the irrigation components and reduce the risk of clogging.
The hydraulic calculations
Flow and pressure requirements, then zoning, then diameters and pressure classes — in that order, with fittings matched to the pipe type.
The irrigation method, by planting
Drip for trees, shrubs, and row planting; sprays and rotors for turf. Their precipitation rates differ, so the two are not mixed within one zone.
The control architecture
The controller and its zone count, and how the signal reaches the electric valves — wired or wireless, per the selected system and the site. For a wired link, burial-rated cable sized to run length and valve count.
Availability of compatible spares
The spare-parts question belongs to the selection, not to the aftermath of a failure: are parts compatible with the proposed brand and model obtainable? The team checks on enquiry.
The manufacturers behind these families
Ten brands: six under a distribution authorization, four we supply per project need.
Documented distribution authorizations
Hunter
Authorized distributor
Elysee
Authorized distributor
PLASCO
Manufacturer-approved distributor
MPI ATLAS
Authorized distributor
Asharqiyah Cables
Authorized distributor
Toro
Authorized distributor
Brands we supply
AZUD
Brand whose products we supply
Pegler
Brand whose products we supply
AVK
Brand whose products we supply
Lowara
Brand whose products we supply
Each relationship's geographic scope, the authorization letter where one exists, and every logo's source — on the brands page.
See our brandsTwo ways to ask
Pick the closest path and the form opens with the enquiry type and family filled in.
Request a quotation for your project
For projects, quantities, bills of quantities, and supply tied to a design or a complete system. The team replies with a quotation and a technical proposal.
What speeds up the reply
- Project location and approximate area
- The BOQ or drawings if available
- Planting and turf types
- The available water source
Check a product or spare part
For a specific family, a replacement, an accessory, or a spare part. This site shows no live stock: the team checks availability across our warehouses and manufacturer supply, then replies.
What speeds up the reply
- The family or part you need, and how to identify it
- The brand or model if you know it
- The quantity required
- Delivery location and when you need it
Prefer to talk directly? +966 53 799 7294 · info@sgarden.live